Your Friendly Local and Online Game Stores

Products 1-28 of 28
Show
Basing Glue
Retail: $4.99
Price: $4.99
View
Availability: In Stock
Item #: 5713799201309 -

Description pending

Citadel: Plastic Glue
Retail: $7.35
Price: $7.35
View
Availability: In Stock
Item #: 5011921072934 -

Designed specifically for assembling plastic Citadel miniatures, Citadel Plastic Glue comes in a bottle with a handy applicator nozzle, making it as easy as possible to put your models together. 

Citadel Super Glue
Retail: $8.75
Price: $8.75
View
Availability: In Stock
Item #: 5011921072941 -

Citadel Super Glue is specifically designed for the assembly of metal and resin Citadel and Forge World miniatures. This glue is supplied in five 0.5 gram aluminium tubes, to be used as needed.

IC-2000: Extra Strength Glue 1oz Cyanoacrylate (Bob Smith)
Retail: $9.95
Price: $9.95
View
Availability: In Stock
Item #: 707336118002 -

IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. For model use, IC-2000™ is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated with INSTA-SET™. When cured, IC-2000™ is pliable enough to be...

IC-2000: Tire Glue 1/2oz Cyanoacrylate (Bob Smith)
Retail: $6.95
Price: $6.95
View
Availability: In Stock
Item #: 707336117005 -

IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. For model use, IC-2000™ is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated with INSTA-SET™. When cured, IC-2000™ is pliable enough to be...

Insta-Cure: Gap Filling Medium 1/2oz Cyanoacrylate (Bob Smith)
Retail: $3.95
Price: $3.95
View
Availability: In Stock
Item #: 707336106009 -

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then...

Insta-Cure: Gap Filling Medium 1oz Cyanoacrylate (Bob Smith)
Retail: $5.95
Price: $5.95
View
Availability: In Stock
Item #: 707336107006 -

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then...

Insta-Cure: Gap Filling Medium 3/4oz Cyanoacrylate (Bob Smith)
Retail: $4.95
Price: $4.95
View
Availability: In Stock
Item #: 707336133005 -

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then...

Insta-Cure: IC-GEL 0.7oz Ethyl Cyanoacrylate Gel (Bob Smith)
Retail: $7.95
Price: $7.95
View
Availability: In Stock
Item #: 707336116008 -

IC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE™. IC-GEL™, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL™ can be...

Insta-Cure: Super Thin 1/2oz Cyanoacrylate (Bob Smith)
Retail: $3.95
Price: $3.95
View
Availability: In Stock
Item #: 707336101004 -

A powerful type superglue that bonds in 1-3 seconds. The Super Thin Insta-Cure is runnier making it easier to get into those tight spaces.

Insta-Cure: Super Thin 1oz Cyanoacrylate (Bob Smith)
Retail: $5.95
Price: $5.95
View
Availability: In Stock
Item #: 707336102001 -

A powerful type superglue that bonds in 1-3 seconds. The Super Thin Insta-Cure is runnier making it easier to get into those tight spaces.

Insta-Cure: Super Thin 3/4oz Cyanoacrylate (Bob Smith)
Retail: $4.95
Price: $4.95
View
Availability: In Stock
Item #: 707336131001 -

A powerful type superglue that bonds in 1-3 seconds. The Super Thin Insta-Cure is runnier making it easier to get into those tight spaces.

Insta-Flex: Flexible Thin Low Odor 1oz Cyanoacrylate (Bob Smith)
Retail: $9.95
Price: $9.95
View
Availability: In Stock
Item #: 707336119009 -

Insta-Flex™ flexible thin CA is ideal for many applications, including the installation of CA hinges. When cured, INSTA-FLEX™ does not turn brittle and remains clear, even if accelerated with INSTA-SET™. It has superior shock resistance. Although not as thin in consistency as INSTA-CURE™, INSTA-FLEX™ still has good penetrating qualities and its application can be easier to control. For CA hinges, we recommend drilling a 1/16" hole in the center of the hinge slots to insure the complete...

Insta-Set Accelerator Spray (Bob Smith)
Retail: $5.95
Price: $5.95
View
Availability: In Stock
Item #: 707336151009 -

After joining parts with cyanoacrylate (CA), spray the seams with insta-Set to sure the CA glue in 8-10 seconds. For difficult to bond materials, Insta-Set can be applied to one part (with CA on the other) before joining. Compatible with all surfaces, including clear plastics and foams.

Maxi-Cure: Extra Thick Glue 1/2oz Cyanoacrylate (Bob Smith)
Retail: $3.95
Price: $3.95
View
Availability: In Stock
Item #: 707336111003 -

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of...

Maxi-Cure: Extra Thick Glue 3/4oz Cyanoacrylate (Bob Smith)
Retail: $4.95
Price: $4.95
View
Availability: In Stock
Item #: 707336135009 -

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of...

Modeling Compound: Green Stuff (Army Painter)
Retail: $9.95
Price: $9.95
View
Availability: In Stock
Item #: 5713799503700 -

The original Kneadatite (best known as Green Stuff) is used by model makers and hobbyists for conversions, filling mold lines and sculpting miniatures. - GREAT FOR ADDING BITS OR HIDING MOLD LINES - HARDENS WHEN THE TWO COMPONENTS ARE MIXED - USE WITH SUPER GLUE TO GLUE LARGER COMPONENTS

Modeling Compound: Citadel: Green Stuff
Retail: $11.50
Price: $11.50
View
Availability: In Stock
Item #: 5011921029914 -

Green Stuff is a two-part modelling putty that is useful for filling in gaps on models and sculpting additional details. When the two colours are mixed together, they form a malleable putty that can be applied to plastic, resin and metal miniatures and then molded into shape using a Citadel Sculpting Tool. Once it has fully cured, Green Stuff is solid enough to glue other components to and can be painted over using Citadel Paints.This pack contains 20g of Green Stuff Modelling Putty. ...

Modeling Compound: Citadel: Liquid Green Stuff
Retail: $6.50
Price: $6.50
View
Availability: In Stock
Item #: 5011921069361 -

Liquid Green Stuff is the ideal tool for filling in small gaps on a miniature. Because it is water soluble you can use a normal Citadel Paint Brush to apply it (just make sure you wash the brush afterwards). The Liquid Green Stuff will then set in place, filling the gap neatly and efficiently. It can also be filed using the Citadel Emery Boards for an even smoother finish.This pot contains 12ml of Liquid Green Stuff, one of 4 Technical paints in the Citadel Paint range. This non-toxic liquid...

Plastic Glue (Gale Force 9)
Retail: $5.50
Price: $5.50
View
Availability: In Stock
Item #: 9420020227132 -

Plastic-Cure: Plastic Model Glue 1/2oz, Brush On, Odorless - Cyanoacrylate (Bob Smith)
Retail: $6.95
Price: $6.95
View
Availability: In Stock
Item #: 707336105002 -

Plastic-Cure™ is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in many cases is an easier way to apply the CA. As long as brush is put back into the bottle after use, the bristles of the brush will not harden. Care must be taken, however, not to introduce foreign material into the bottle. The brush should not be used, for example, to apply CA to wood that has been freshly sanded. Plastic-Cure will also bond wood,...

Quik-Cure: Epoxy 4.5oz (Bob Smith)
Retail: $11.95
Price: $11.95
View
Availability: In Stock
Item #: 007336201002 -

QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE™...

Relentless Dragon: PVA Glue 2 fluid oz
Retail: $2.50
Price: $2.50
View
Availability: In Stock
Item #: rdpvaglue -

2 fluid ounces of good old PVA glue, perfect for basing minatures.

Scenic Cement (Woodland Scenics)
Retail: $11.50
Price: $11.50
View
Availability: In Stock
Item #: 724771001911 -

Description pending

StyroGoo Glue (3.4 Oz)
Retail: $3.50
Price: $3.50
View
Availability: In Stock
Item #: STYROGOO -

The Instant Tack EPS Foam Glue. For all your craft and hobby needs. Ideal for permanently adhering foam, foam rubber, paper, glass, fabric, wood, plastic, metal and cardboard. Great for bonding uneven surfaces, as it will slightly expand. Industrial strength.Bonds to most surfaces.Permanent in or outdoor.Nonwrinkling even on paper.Clear when dry.Fast drying. Industrial Foam Glue.Keep out of reach of children.Flammable. ...

Super Glue (Gale Force 9)
Retail: $5.50
Price: $5.50
View
Availability: In Stock
Item #: 9420020227118 -

Super Glue Activator (Blister Card)
Retail: $7.50
Price: $7.50
View
Availability: In Stock
Item #: 5713799504806 -

Description pending

Un-Cure: Cyanoacrylate Remover 1oz (Bob Smith)
Retail: $3.95
Price: $3.95
View
Availability: In Stock
Item #: 707336161008 -

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics...